大盈的複合金屬是以耐腐蝕金屬鈦、鋯包覆著銅,它同時具有兩種金屬的優點 :
耐腐蝕及高導電能力。將它運用在溶液中的導電匯流桿,完全改善傳統溶液上的導電匯流桿的缺點,並節省10% ~ 30%的能源消耗

Spemet supplies the metallurgical bonding clad materials:
Titanium clad Copper and Zirconium clad Copper. The clad materials have both anti-corrosion and high current transfer capabilities. Spemet utilizes TiCladCu and ZrCladCu to be the immersion bus bars, which definitely improves the defectives of the conventional bus bar and save 10%~30% energy in plating system.


液中導電,效率高,降低電壓
Current-transfer under solution result in low potential and high efficiency.

無銅綠產生,不用維修
Non-copper oxide, free maintenance.

長期使用,供電量穩定
Good for long-term operation. Current supply is stable.

無銅綠掉入溶液,避免污染溶液
Non fall-off of deposited impurities and copper oxide cause the easy management solution.

導電效率高不生熱,排氣冷卻設備負擔輕
High current transfer doesn’t cause heat generation to reduce loading of ventilation and cooling systems.

無阻礙空間,添加陽極安全容易
Open space makes the loading of anode easier and safer.


空氣中導電,電阻高,電壓高
Current-transfer in the air result in high resistance and potential.

定期去除銅綠
To clean copper oxide is necessary.

多次除銅綠後,銅尺寸變小,供電量減少
To clean oxide will shorten copper size to decrease current supply.

銅綠掉入溶液污染溶液,影響電鍍品質
The solution will contaminated by the fall-off of deposited impurities and copper oxide

電阻高易生熱,排氣冷卻設備負擔重
High electrical resistance causes heat generation to make loading of ventilation and cooling systems heavier.

阻礙添加陽極空間,造成不便
The conventional bus bar interrupts the loading of anode.


材質:鈦包銅、鋯包銅、不袗包銅
Material: Titanium clad copper, Zirconium clad copper, and Stainless steel clad copper.

規格:方形10mm x 50mm、12mm x 50m, 圓形 25mm Dia, 31.8mm Dia。其他尺寸可訂製。
Specification: Rectangular 10mm x 50mm, 12mm x 50mm
       Round 25mm Diameter, 31.8mm Diameter.
       The customer size under request.



Copyright © 2000-2019 Spemet.Com All Rights Reserved.   大盈貿易有限公司 SPEMET CO., LTD.